Ridge tiles are the highest and most exposed point of any pitched roof — and when mortar fails at the ridge, water penetrates directly into the roof structure. ProMax Roofing & Building provides expert ridge tile replacement and repointing across Leeds, West Yorkshire and surrounding areas. From isolated ridge repairs to complete re-ridging with dry-fix systems, our director-led team delivers lasting results. Call 07347 627044 for a free survey.
Ridge Work in Leeds — Ridge Tile Replacement & Repointing
Why Do Ridge Tiles Fail?
Ridge tiles sit at the apex of the roof, bedded in mortar and subject to the worst of every storm that crosses Leeds and West Yorkshire. Thermal expansion, freeze-thaw cycles, and wind loading work on the mortar bed year after year until it cracks, shrinks, and eventually fails entirely. Loose or missing ridge tiles are not just an aesthetic problem — they are a direct water ingress point and a safety hazard if tiles slide and fall.
Traditional mortar-bedded ridge tiles are being replaced on many properties across Leeds with dry-fix ridge systems — mechanical fixings with ventilated ridge units that eliminate mortar entirely. Dry-fix systems perform better in the long term because there is no mortar to crack, the fixings are structural, and the design allows natural ventilation into the roof space — reducing condensation risk. They carry a full manufacturer guarantee.
ProMax Roofing directors Paul and Lee have repaired and replaced ridge tiles across West Yorkshire for 15 years. We diagnose ridge failures accurately, distinguishing between mortar failure, tile cracking, and underlying rafter or structural issues that require attention before ridging.
Our ridge work process in Leeds starts with a safe access assessment — ridge repairs require proper ladder or scaffold support, and we never rush this step. Once on the roof, we carry out a full ridge inspection, identifying failed mortar beds, cracked tiles, lifted sections, and any underlying batten or structural issues.
For mortar repointing: we remove loose and failed mortar with chisels (no power tools that risk cracking tiles), brush clean, and re-bed tiles in lime-gauged mortar matched to the existing mix. Pointing is finished flush to the tile arris and struck to shed water. Adjacent flashings and abutments are checked while we are at that level.
For dry-fix ridge installation: existing tiles and mortar are removed completely. Ridge battens are installed, and mechanical fixing brackets are fitted at the specified centres. Ventilated ridge units are clipped into place — no mortar, no future maintenance. The system is compatible with most standard concrete and clay ridge tile profiles.
We combine ridge work with full roof replacement, chimney pointing, and leadwork repairs during the same access visit — saving scaffold costs across Leeds, Wakefield, Bradford, and Harrogate. Call 07347 627044 for a free assessment.
